A new tooling system allows auto manufacturers to construct vacuum-end effector tools with minimal design time — to meet their exact needs for critical applications, such as sheet metal stamping, die-casting, injection molding, thermoforming, and glass handling. Made of hard-coat anodized aluminium, the Piab Modular Automation Tooling (PMAT) is lightweight and easy to assemble on-site […]

What if you could reduce all your leaks without turning a wrench? Well, it is possible with good pressure control. And sometimes it is as easy as turning a knob. The principle is shown in the following orifice chart, Fig. 1. As the pressure to a leak reduces by 1 psi, the flow consumed by […]

Ingersoll Rand announces the launch of its Helix Connected Platform, which provides valuable insights on compressed air systems to ensure reliability and extend equipment life. Developed for industrial applications to maximize uptime and peace of mind, the Helix Connected Platform provides continuous, real-time data monitoring for compressed air systems to enable maximum operational uptime. Advanced […]

From recently completed production lines, Festo introduces a new generation of competitively priced compact grippers that offer a host of advantages for precision electronics and small part assembly. The DHPC parallel gripper offers ≤ 0.01 mm repetition accuracy, while the DHWC angle and DHRC radial  gripper variants offer ≤ 0.2 mm accuracy. The DHPC, DHWC, […]

One of many energy conservation measures available to industrial users is the use of pressure/flow control regulators. These are installed in systems to reduce the plant pressure while leaving the air compressors to operate within a wide pressure band, making them more efficient. A compressed air pressure/flow controller is a device used to regulate and […]

Engineers and other manufacturing professionals looking for a single device that regulates pressure extremely accurately while handling high flows will find it in the Proportion-Air QB4 electro-pneumatic proportional pressure regulator. The QB4 pressure control valve is a complete electronic pressure regulating package consisting of a pilot unit with two solenoid valves, closed-loop electronic controls and […]

20 years ago, COVAL first created SITON, an innovative, exclusive and patented silicone-free material. Its SITON suction pads are characterized not only by their non-marking capability, but also by their abrasion resistance and remarkable mechanical performance at temperatures of up to 160°C. SITON was originally developed to satisfy the specific requirements of the cosmetics industry, […]

In future, updating pneumatic circuits through the IoT will help manufacturers stay current and benefit from the opportunities available to them. Contributed by Mike Parzych, Product Marketing Manager  •  Norgren Smart, internet-connected devices have become increasingly significant in all areas of life, and industry is no exception. The use of automation, artificial intelligence, and advanced analytics […]

A large automotive service shop had two 100-hp compressors, one being a VSD, both available to supply the compressed air they needed for painting and body assembly of large vehicles. The load was full of peaks, and the maintenance staff needed up to 400 cfm to provide flow to paint booths and breathing air hoods […]

An unavoidable challenge when defining a new bag gripping system in a palletizing line is to get the exact measurements to align with the conveyor rollers for a smooth lifting and releasing process. This demands time-consuming analysis and design and, later, even more time for adaptation and adjustments. Furthermore, additional solutions may have to be […]

A farm implement manufacturer expanded its facility about 15 years ago, and personnel decided they wanted a premium compressed air system. They purchased three very efficient two-stage premium compressors, one being a VSD, and connected the equipment with large piping to reduce pressure loss. Filters were mist-eliminator style to reduce pressure loss. Air dryers were […]

Last month, I had the pleasure of attending Pack Expo in Las Vegas for the first time in about five years. I’ve always enjoyed that show, seeing all the packaging machinery and conveyors operating, watching the pneumatics and motion control technologies do what they do best. But I did notice one thing this year — a […]

If you have ever done leakage detection with an ultrasonic leak detector you will get to know the common leak locations. If you have no detector, there is no excuse these days, excellent equipment is available for you to purchase at a reasonable price, go get it! A common sight — or rather sound — […]

ControlAir today announced the introduction of the new Type 1005V Electronic Vacuum Regulator. It is the first electronic vacuum regulator offered by ControlAir. The Type 1005V Electronic Vacuum Regulator is used in various industrial and automation applications to precisely control and regulate the flow of air or gases in a system. The Type 1005V Electronic […]

The new rotary vane vacuum pump R5 RA 0520 A from Busch increases energy savings by up to 25%. It features a compact and hygienic design, reduced heat emissions, and enables faster and easier maintenance. The optional Ecotorque variable speed drive provides up to 50% additional energy savings and a 20% increase in pumping speed. […]

Accurate, repeatable pressure regulation for applications like testing industrial products and processes, running fountains, or controlling the temperature of saturated steam can be easily achieved with the right pressure regulator assembly. A Proportion-Air QBX proportional electro-pneumatic pressure regulator piloting a Burling Valve BD4 pressure reducing regulator is an ideal combination to meet the demands of […]

In many industrial sectors where sheet metal handling is required, vacuum handling is increasingly used,  and suction cups have become an essential element of safety, reliability, and productivity. With CTC high-performance bell-type suction cups, COVAL has brought manufacturers the best of both flat and bellows suction cups to enhance system efficiency. The main feature of this […]

Every manufacturer using compressed air shares the challenge of keeping compressed air systems running efficiently and reliably. Depending on the industry, the compressed air system accounts for 10-50% of a plant’s energy usage and is as essential to uptime as electricity. But compressors are inherently inefficient. Leakage, irregular maintenance, pressure settings, and controls contribute to […]

Spartan Scientific proudly releases its latest engineering success, the Series 35G5 diaphragm style solenoid valve. Designed to excel in challenging environments and engineered for exceptional durability, this stainless-steel valve brings a new level of reliability and versatility to fluid control applications. The Series 35G5 solenoid valve is available in 1/4, 3/8, and 1/2 in. NPT […]

A wood products company hired a compressed air auditor to check out its system and try to discover why it now needed to run three compressors rather than the normal two units that previously satisfied the plant demand. The auditor placed instruments on their system to measure pressure, power, temperature, and flow — and quickly […]

By Josh Cosford, Contributing Editor Pneumatic systems are widely used within industrial environments to power machinery and equipment, providing reliable and efficient performance. The Filter-Regulator-Lubricator (FRL) is vital in maintaining optimal air quality and pressure within these systems. However, when selecting an FRL, one must not overlook the significance of understanding FRL air flow characteristics, […]

VMAC has announced that Jamie McPherson is the company’s new Director of Engineering. An accomplished leader with experience in industrial manufacturing and design engineering, McPherson will lead VMAC’s vertically integrated product development department, which includes a foundry, custom machine shop, and mechanical, electrical, and software engineering teams. “Jamie’s proven leadership and dedication to continuous improvement […]

Festo launches MS-Basic, a family of pneumatic service units in polymer housings that offer attractively priced components covering most application needs. MS-Basic air preparation components have the functionality to perform the most important technical tasks necessary for proper compressed air preparation and consist of pressure regulators, filter regulators, electric on/off and soft start valves, as […]

A metal process plant has two breathing air purifiers installed on site for the protection of its personnel. These units are installed to ensure hazardous Carbon Monoxide is kept out of breathing air. Recently, the two systems were evaluated by a compressed air auditor. When paint fumes or metal particles are in the ambient air […]

Emerson has introduced a new Class A, IO-Link master that provides customers with a cost-effective solution for smart and analog sensor connectivity on the Aventics Series G3 Fieldbus platform. The G3 IO-Link Master is suitable for machine architectures with many sensors and pneumatic valves, and where it’s important to have reliable digital data communication between […]